How To Fix 0xc0000428 Error Code. In this article, you will read cause of 0xc0000428 error and how to solve Digital Signature For This File Couldn’t Be Verified code error.
The 0xc0000428 code error is a blue screen error. It leaves your screen bricked. You should fix these types of errors very carefully as they can damage your system that even you cannot perform system repair. If you do anything wrong, you will also not be able to reboot your system and also cannot go into safe mode. Here, we will going to troubleshoot this issue.
Cause Of 0xc0000428 Error:
You will see an error:
“Windows can’t verify the digital signature for this file: \Windows\System32\winload.exe – Error code: 0xc0000428“.
There are two reasons for this error:
-Outdated BOOTMGR.
-Dual boot is enabled because the older BOOTMGR is still in use and there is no boot record for the new operating system.
-Windows is not verifyingDigital Signature for recent Hardware or software change.
How To Fix 0xc0000428 Error Code?
To fix The Digital Signature For This File Couldn’t Be Verified error, follow the methods below.
Method 1 – Fix Boot Manager And BCD:
Use command prompt to open a tool called bootrec.exe. It is used to solve the boot related issues. As you are stuck at the boot screen, you have to open the Command Prompt from the boot screen. To do so, you need a recovery data on Windows 10.
1.Download and burn the Windows file from their website onto a USB.
2.Click on Repair your computer.
3.This will take you to Advanced Options.
4.Select Command Prompt.
5.Now, enter the following commands one by one and press Enter after each one.
bcdboot C:\windows /s C:
bootrec /fixMBR
bootrec /fixBoot
bootrec /rebuildBCD
Note: Here, C:\windows is the windows installation folder directory, and C: is the boot partition. Change them according to your device. There is a space before the /.
6.Restart your computer.
7.Try booting into your computer now.
8.Bootrec.exe tool will repair your device boot files.
9.Now, you will be able to boot normally.
Method 2 – Startup Repair In Windows Recovery Environment:
If you don’t want to use Command Prompt, then you can run a Startup repair as well.
1.Open the same boot menu as in method 1.
2.Select Startup Repair.
4.estart your computer.
5.It should boot normally.
Method 3 – Disable Driver Signature Enforcement:
Disable the Driver Signature Enforcement from the boot menu can solve the issue. You can do this from repair media. To do so, follow the steps:
1.Download and burn the Windows file from their website onto a flash drive.
2.Click on Repair your computer.
3.This will take you to Advanced Options.
4.In Advanced Options, select Startup Settings.
5.Then, select Disable driver signature enforcement.
6.Click on number 7, or press the F7 key to select the option.
7.Press Enter to return to your Operating System.
8.Now try booting into Windows. It will work normally.
If you can boot into Windows, you can do this in Advanced settings from Windows Settings. Follow the steps:
1.Open Windows Settings app.
2.You can use the keyboard shortcut Win + I.
3.Open Update and Security.
4.From the left pane menu, select Recovery.
5.From the right pane, select Advanced Startup.
6.Click on Restart now to open Advanced Startup Options.
