How To Fix PS4 Error SU-42118-6

By Ammarrauf01

How To Fix PS4 Error SU-42118-6? In this article, you will read how to solve the SU-42118-6 error on PS4. There can be multiple reasons for the SU-42118-6 error. An outdated system software, damaged hardware, and damaged ribbon can trigger this error. Here, I have discussed some solutions to fix the SU-42118-6 PS4 error.

How To Fix PS4 Error SU-42118-6?

Method 1 – Restart PS4 & Power Cycle:

Restarting your PS4 can fix the problem. To do so:

1.Press and hold the Power button until the PS4 shuts down.
2.Unplug all the power cords from the device and the power outlet.
3.Wait for several minutes.
4.Then, hold the Power button again for 20-25 seconds.
5.Reconnect all the power connections.
6.Switch on the device.
7.After that press the Power button.
8.This will drain all the power and rearrange the configuration.
9.The issue will get resolved, if not try the next method.

Method 2 – Check Ribbion:

Ribbon connects the Blu-ray drive to the gaming console. Check it if you get the SU 42118-6 error. A loose, broken, or damaged ribbon can cause this error. Replace it, if needed. Also, check, if it is connected properly or not.

Method 3 – Replace Faulty Hard Drive:

A corrupted PS4 HDD can trigger this error. A loose-connected hard drive can also be a problem. If everything is connected correctly, but still the issue persists, then replace the hard disk.

Method 4 – Check HDMI Cable:

A damaged or loose HDMI cable can cause this PS4 error. For checking the HDMI cables:

1.Turn off your PS4.
2.Disconnect the HDMI cables from both ends.
3.Wait for a few minutes.
4.Then reconnect the cables back to the port correctly.
5.Now restart your PS4 device.
6.After the PS4 restarts, check if the issue is fixed.

Method 5 – Factory Reset Settings:

Resetting your device’s settings to the factory settings can solve SU 42118-6 error. To do so:

1.Switch off your PS4 console.
2.Press and hold the Power button until the console beeps twice.
3.Connect the controller with a USB cable.
4.Turn on the device into Safe Mode.
5.Pair both devices (controller and console) by pressing the PS button.
6.Select the Restore Default Settings option.
7.Tap on Simultaneously hold the X button to initiate the process.

How To Fix PS4 Error SU-42118-6 - pic1

Method 6 – Update System Software:

Outdated software on PS4 can also trigger this error. Install the latest version software. To do so:

1.Open the PS4 settings from the Main menu.
2.Select the System option.
3.Choose the System Software Update option.
4.Wait until the device downloads and installs the latest version.
5.Now restart PS4.
6.Check that the issue is resolved.

Method 7 – Contact Support Centre:

If none of the above solutions works, then contact the PS4 support from their official website to fix the PS4 error SU42118-6.